Introduzione

Use this guide to repair the clear indicator light. This guide will help you through replacing the light bulb.

  1. Make sure toaster is unplugged.
    • Make sure toaster is unplugged.

    • Turn toaster upside down so screws on bottom side are facing toward the ceiling and the door is facing towards you.

  2. On the left hand side, unscrew the middle screw.
    • On the left hand side, unscrew the middle screw.

  3. Remove the panel on the left hand side. The indicator light is located in the red tube that has wires covered by black tubing coming out.
    • Remove the panel on the left hand side. The indicator light is located in the red tube that has wires covered by black tubing coming out.

  4. Pull the black wires to remove the indicator light from the red tube.
    • Pull the black wires to remove the indicator light from the red tube.

  5. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  6. Use scissors to cut open cord sheathing and peel back. Use scissors to cut open cord sheathing and peel back.
    • Use scissors to cut open cord sheathing and peel back.

  7. Use the wire-cutters to remove the light bulb.
    • Use the wire-cutters to remove the light bulb.

  8. Solder the replacement light bulb back onto its original position. Solder the replacement light bulb back onto its original position.
    • Solder the replacement light bulb back onto its original position.

  9. Use electrical tape to reseal the sheathing.
    • Use electrical tape to reseal the sheathing.

  10. Reinsert the indicator light back into the red tube.
    • Reinsert the indicator light back into the red tube.

  11. Turn toaster upside down so screws on bottom side are facing toward the ceiling and the door is facing towards you.
    • Turn toaster upside down so screws on bottom side are facing toward the ceiling and the door is facing towards you.

  12. On the left hand side, screw the middle screw back in.
    • On the left hand side, screw the middle screw back in.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Tony Wang

Membro da: 05/10/2012

64 Reputazione

5 Guide realizzate

Team

Cal Poly, Team 6-35, Regan Fall 2012 Membro di Cal Poly, Team 6-35, Regan Fall 2012

CPSU-REGAN-F12S6G35

4 Membri

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 509