Introduzione

Use this guide to glue the door handle back to its original position so that it is possible to open the door.

Strumenti

Parti

Nessuna parte richiesta.

  1. The door handle may fall off if overused or not glued properly.
    • The door handle may fall off if overused or not glued properly.

  2. Apply glue to the inside of the bracket on the handle.
    • Apply glue to the inside of the bracket on the handle.

  3. Spedizione gratuita per tutti gli ordini superiori a 100,00 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  4. Replace the handle in its original position on the door.
    • Replace the handle in its original position on the door.

  5. Hold firmly for a minute to allow glue to properly set.
    • Hold firmly for a minute to allow glue to properly set.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Jack Cate

Membro da: 19/10/2012

29 Reputazione

1 Guida realizzata

Team

Cal Poly, Team 6-35, Regan Fall 2012 Membro di Cal Poly, Team 6-35, Regan Fall 2012

CPSU-REGAN-F12S6G35

4 Membri

6 Guide realizzate

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 2

Tutti i Tempi: 763