Salta al contenuto principale
Unisciti alla Community delle riparazioni - Crea un account

Eclipse 180BL Touch Pad Replacement

Cosa ti serve

    1. Eclipse 180BL Touch Pad  Replacement, Touch Pad: passo 1, immagine 1 di 1
      • Remove the two screws at the bottom of the device.

      • The two screws can be removed using the PH00 head located in the iFixit Repair toolkit.

      • The two screws are 1/8 inch in length.

      • Remove the cover to reveal the internal component.

      Chiedi a FixBot

      Aggiungi Commento

    2. Eclipse 180BL Touch Pad  Replacement: passo 2, immagine 1 di 3 Eclipse 180BL Touch Pad  Replacement: passo 2, immagine 2 di 3 Eclipse 180BL Touch Pad  Replacement: passo 2, immagine 3 di 3
      • Using the Spudger, forcefully push upward on the USB port of the device to remove the main component.

      • This will release the tension on the multiple parts. One of which will be the touch pad.

      • The touch pad can now be easily replaced.

      • The touch pad has a smaller center piece that must be replaced for proper usage of the device.

      Chiedi a FixBot

      Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Annulla: non ho completato questa guida.

Un'altra persona ha completato questa guida.

0Commenti sulla guida

Aggiungi Commento

Visualizza statistiche:

Ultime 24 ore: 0

Ultimi 7 giorni: 6

Ultimi 30 giorni: 33

Tutti i Tempi: 1,075