Introduzione

We will now disassemble the guts of the phone, including the SIM card reader, vibrating unit, power toggle button, audio speaker, power assembly/microphone, and the battery connector.

Parti

Nessuna parte richiesta.

  1. Hold the phone and push the white button with your thumb. While pressing the button, slide the back plate up (towards the top of the phone) and off the phone. While pressing the button, slide the back plate up (towards the top of the phone) and off the phone.
    • Hold the phone and push the white button with your thumb.

    • While pressing the button, slide the back plate up (towards the top of the phone) and off the phone.

  2. Locate grey buttons beneath battery (shown). Spread buttons simultaneously away from each other and the battery will pop out.
    • Locate grey buttons beneath battery (shown).

    • Spread buttons simultaneously away from each other and the battery will pop out.

    • Remove battery from phone.

  3. Where shown, spread the front faceplate and push forward. Flip over the device, and pry the faceplate away.
    • Where shown, spread the front faceplate and push forward.

    • Flip over the device, and pry the faceplate away.

  4. Remove six T6 screws. Remove six T6 screws.
    • Remove six T6 screws.

  5. Insert spudger between screen assembly and phone body. Spread apart as shown. Avoid damaging the screen assembly by removing the screen slowly.
    • Insert spudger between screen assembly and phone body.

    • Spread apart as shown. Avoid damaging the screen assembly by removing the screen slowly.

  6. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  7. Remove logic board as shown. Remove logic board as shown.
    • Remove logic board as shown.

  8. Use the following legend to locate each component:
    • Use the following legend to locate each component:

    • Microphone/power assembly.

    • Vibrating unit.

    • SIM card reader.

    • Audio speaker.

    • Power toggle button.

    • Battery connector.

  9. Insert spudger between power assembly/micro-phone and phone body. Pry as shown and remove the power assembly/microphone.
    • Insert spudger between power assembly/micro-phone and phone body.

    • Pry as shown and remove the power assembly/microphone.

  10. Once located, the following components are easily removed by pulling them out with your hand.
    • Once located, the following components are easily removed by pulling them out with your hand.

    • Microphone/power assembly.

    • Vibrating unit.

    • SIM card reader.

    • Audio speaker.

    • Power toggle button.

    • Battery connector.

  11. Audio speaker. Audio speaker.
    • Audio speaker.

  12. SIM card reader. SIM card reader.
    • SIM card reader.

  13. Vibrating unit. Vibrating unit.
    • Vibrating unit.

  14. Power toggle button. Power toggle button.
    • Power toggle button.

  15. Battery connector. Battery connector.
    • Battery connector.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Nico Lee

Membro da: 19/04/2010

54 Reputazione

6 Guide realizzate

Team

Cal Poly, Team 30-41, Garner Spring 2010 Membro di Cal Poly, Team 30-41, Garner Spring 2010

CPSU-GARNER-S10S30G41

4 Membri

11 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 2,765