Introduzione

This is a disassembly guide for the face of the clock, useful in the case that the face requires: maintenance, replacement, or access to the interior parts.

Parti

Nessuna parte richiesta.

Grasp the plastic cover and carefully pull straight back so that the clock cover dislodges from its housing.
  • Grasp the plastic cover and carefully pull straight back so that the clock cover dislodges from its housing.

  • If any additional assistance is required for this step, it is recommended to use the plastic opening tool to help pry the edges of the cover simultaneously or a suction cup if you cannot grip the rim.

Aggiungi Commento

Using your fingers, grasp the point where the hands of the clock meet in the center and pull straight back until they dislodge from the motor.
  • Using your fingers, grasp the point where the hands of the clock meet in the center and pull straight back until they dislodge from the motor.

  • Be sure that you remove all three hands as well as the pin that connects them in this one step. This component should come out as a single piece.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Devin Gooding

Membro da: 20/01/2015

104 Reputazione

1 Guida realizzata

Team

USF Tampa, Team 19-1, Blackwell Winter 2015 Membro di USF Tampa, Team 19-1, Blackwell Winter 2015

USFT-BLACKWELL-W15S19G1

4 Membri

4 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 7

Tutti i Tempi: 214