Salta al contenuto principale

Dewalt DCD778 Forward/Reverse Switch Replacement

Cosa ti serve

  1. Dewalt DCD778 Forward/Reverse Switch  Replacement, Battery: passo 1, immagine 1 di 1
    • Grab the drill in one hand and cup the battery (located at the bottom of the drill) with the other hand.

  2. Dewalt DCD778 Forward/Reverse Switch  Replacement: passo 2, immagine 1 di 1
    • Use your other hand to push down on the yellow button on the battery.

  3. Dewalt DCD778 Forward/Reverse Switch  Replacement: passo 3, immagine 1 di 1
    • Pull the battery in a horizontal direction away from the drill.

  4. Dewalt DCD778 Forward/Reverse Switch  Replacement, Forward/Reverse Switch: passo 4, immagine 1 di 1
    • Remove the eight 16 mm, Torx Security #15 screws.

  5. Dewalt DCD778 Forward/Reverse Switch  Replacement: passo 5, immagine 1 di 1
    • Lay the drill on its side and gently lift the top half off it.

  6. Dewalt DCD778 Forward/Reverse Switch  Replacement: passo 6, immagine 1 di 1
    • Remove the drill mechanism from the shell.

  7. Dewalt DCD778 Forward/Reverse Switch  Replacement: passo 7, immagine 1 di 1
    • Disconnect the forward/reverse switch from the trigger by pulling the mechanism out and leaving the switch in the frame.

    • To replace just pull the switch out and put the new one in the opening.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Brittany

Membro da: 03/09/19

693 Reputazione

5 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 8

Ultimi 30 Giorni: 35

Tutti i Tempi: 1,614