Introduzione

Replace the old RAM cards to greatly enhance computer speed.

Strumenti

Nessun attrezzo richiesto.

Parti

Nessuna parte richiesta.

  1. Make sure the computer is turned off, by selecting the start menu and choosing “Shut Down”.
    • Make sure the computer is turned off, by selecting the start menu and choosing “Shut Down”.

    • Ensure all cables, speakers and other devices are unplugged and turned off before opening the computer case.

  2. Lay the computer on its side; you will see a blue knob. Turn this knob 90 deg clockwise.
    • Lay the computer on its side; you will see a blue knob.

    • Turn this knob 90 deg clockwise.

  3. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  4. Slide the panel case forward about 1/2 inch while knob is turned. Lift panel case off computer.
    • Slide the panel case forward about 1/2 inch while knob is turned.

    • Lift panel case off computer.

  5. The RAM are the two green cards in the corner of the computer.
    • The RAM are the two green cards in the corner of the computer.

    • At each end of the card, there are two white clips securing the RAM to the Motherboard.

  6. Push down both white clips with your thumbs until you hear a click. The RAM cards can now be removed.
    • Push down both white clips with your thumbs until you hear a click.

    • The RAM cards can now be removed.

Conclusione

To reassemble your device, follow these instructions (steps 1-3) in reverse order.

Altre 8 persone hanno completato questa guida.

Wyatt

Membro da: 06/10/2010

742 Reputazione

6 Guide realizzate

Team

Cal Poly, Team 22-4, Maness Fall 2010 Membro di Cal Poly, Team 22-4, Maness Fall 2010

CPSU-MANESS-F10S22G4

4 Membri

13 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 9

Tutti i Tempi: 5,168