Introduzione

A guide on how to remove the Floppy Drive.

  1. Turn the laptop bottom side up with the rear panel facing forward.
    • Turn the laptop bottom side up with the rear panel facing forward.

    Aggiungi Commento

  2. Remove the two T8 Torx screws that secure the LED cover to the base enclosure.
    • Remove the two T8 Torx screws that secure the LED cover to the base enclosure.

    Aggiungi Commento

    • Turn the laptop top side up with the front facing forward. Open the screen.

    Aggiungi Commento

    • Locate the F1 and F2 keys near the top left corner of the keyboard.

    Aggiungi Commento

    • While holding the F1 and F2 keys, insert a spudger between the keys into the notch in the LED cover. Lift up.

    Aggiungi Commento

    • Locate the Pause and Scroll keys near the top right corner of the keyboard.

    Aggiungi Commento

    • While holding the Pause and Scroll keys, insert a spudger between the keys into the notch in the LED cover. Lift up.

    Aggiungi Commento

  3. Spedizione gratuita per ordini superiori a $20
    Usa il codice BLUEANDBLACK al checkout
    Spedizione gratuita per ordini superiori a $20
    Usa il codice BLUEANDBLACK
    • Insert a spudger between the F7 and F8 keys. Lift up to remove the LED cover.

    Aggiungi Commento

    • Lift the back edge of the keyboard and pull towards the screen.

    Aggiungi Commento

    • Pull the cable and lift up to release.

    Aggiungi Commento

    • Remove the keyboard.

    Aggiungi Commento

    • Flip the computer bottom side up with the rear facing forward.

    Aggiungi Commento

    • Remove the six screws shown in picture.

    Aggiungi Commento

    • Remove battery and then remove screw in metal support on case edge

    • Flip the computer top side up with the front facing you.

    Aggiungi Commento

    • Lift up the palm rest from the front edge and swing it towards the screen.

    Aggiungi Commento

    • Locate the first connector. Disconnect by firmly pulling up.

    Aggiungi Commento

    • Locate the second connector. Remove by firmly pulling up.

    Aggiungi Commento

    • Remove the palm rest.

    Aggiungi Commento

    • Locate and remove the three screws shown in picture.

    Aggiungi Commento

    • Lift up and remove floppy drive from the palm rest.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Alex Hernandez

Membro da: 14/04/2010

28 Reputazione

4 Guide realizzate

Team

Cal Poly, Team 29-74, Johann Spring 2010 Membro di Cal Poly, Team 29-74, Johann Spring 2010

CPSU-JOHANN-S10S29G74

3 Membri

7 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 3,001