Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Introduzione

If your Comfort Zone CZ6C loosely attaches onto surfaces, then this simple, two-step guide will help you replace the clamp.

  1. Turn the Comfort Zone CZ6C onto its backside.
    • Turn the Comfort Zone CZ6C onto its backside.

    • Locate the center hinge screw.

  2. With a Philips screwdriver, remove the center hinge screw. Once the center hinge screw is completely removed from its hole, detach the clamp from the Comfort Zone CZ6C. Once the center hinge screw is completely removed from its hole, detach the clamp from the Comfort Zone CZ6C.
    • With a Philips screwdriver, remove the center hinge screw.

    • Once the center hinge screw is completely removed from its hole, detach the clamp from the Comfort Zone CZ6C.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Team

Cal Poly, Team 17-5, Forte Spring 2015 Membro di Cal Poly, Team 17-5, Forte Spring 2015

CPSU-FORTE-S15S17G5

4 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 7

Tutti i Tempi: 671