Salta al contenuto principale

Introduzione

Use this guide to clean the function buttons.

Strumenti

Ricambi

Nessuna parte specificata.

  1. Remove wrist strap and battery. Remove wrist strap and battery.
    • Remove wrist strap and battery.

  2. Remove 2 screws from each side of the camera (4 total, 0.102 in). Remove 2 screws from the bottom on the camera (0.138 in). Do not mix the 4 side screws with the 2 bottoms ones; they are different sizes.
    • Remove 2 screws from each side of the camera (4 total, 0.102 in).

    • Remove 2 screws from the bottom on the camera (0.138 in).

    • Do not mix the 4 side screws with the 2 bottoms ones; they are different sizes.

  3. Gently pull off the front cover. The plate on the side should come off. Gently pull off the back cover.
    • Gently pull off the front cover.

    • The plate on the side should come off.

    • Gently pull off the back cover.

  4. The cases should now be removed.
    • The cases should now be removed.

  5. Clean around the function buttons with a cotton swab dipped in isopropyl alcohol.
    • Clean around the function buttons with a cotton swab dipped in isopropyl alcohol.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Tyler Grossheim

Membro da: 25/01/2011

1.440 Reputazione

6 Guide realizzate

Team

Cal Poly, Team 3-32, Regan Winter 2011 Membro di Cal Poly, Team 3-32, Regan Winter 2011

CPSU-REGAN-W11S3G32

3 Membri

8 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 1,870