Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.
Introduzione
The audio amplification PCB is the PCB which has the task of amplifying the B212D speaker's input signals.
Cosa ti serve
-
-
Remove the 8 Phillips screws from the back of the speaker.
-
-
-
There are two silver, 6 mm-long machine screws with two 1/8" inner-diameter washers on the exterior of the metal electronics box; remove these first using a #2 philips screwdriver.
-
There are five of the same type of machine screw (silver, 6 mm-long) remaining around the metal electronics box's exterior; remove these as well.
-
-
-
-
Remove the 4, 7/32" long machine screws with a #2 phillips head screwdriver.
-
-
-
Remove the 2 indicated flat head machine screws indicated using a #2 phillips head screwdriver.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Altre 5 persone hanno completato questa guida.
6 Commenti
lol pareil je cherche la pcb
I need the panel where I buy it
Calde.dc@GMAIL.COM