Base Replacement

Introduzione

This guide shows the steps to replace the parts in the base.

Remove the four Phillips #0 screws (9.4mm) located at the bottom of the phone on the back side of the base.

Use the spudger to separate the bottom from the top.
There are two clips, located top and bottom, that you have to compress with the spudger.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Membro da: 02/08/16

442 Reputazione

3 Guide realizzate

IUPUI-BAECHLE-S16S1G4

4 Membri

16 Guide realizzate