Introduzione

If your Atari Entertainment System has a power button that needs to be repaired, this guide will take you step-by-step on how to gain access to the power button in order to repair it.

Gently flip the Atari Entertainment System over.  You'll see 7 screws holding the system together. Use a philips head screw driver to remove all seven screws.
  • Gently flip the Atari Entertainment System over. You'll see 7 screws holding the system together. Use a philips head screw driver to remove all seven screws.

  • Pictured above is the Atari 5200 upside down. The orange edited circles over all 7 screws.

Aggiungi Commento

Gently flip the Atari Entertainment System over to the front side. Remove the top.
  • Gently flip the Atari Entertainment System over to the front side. Remove the top.

Aggiungi Commento

  • There are orange objects on the side of the system's top, pinch them.

  • If the triangles cannot be gripped, push the power button on the opposite side. This will lift the triangle to give access to easier grip.

Aggiungi Commento

  • The Power button can now be removed/clean/replaced.

  • Be sure to keep an eye on the spring.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Alan Abelson

Membro da: 26/09/2014

230 Reputazione

5 Guide realizzate

Team

USF Tampa, Team 13-1, Staggers Fall 2014 Membro di USF Tampa, Team 13-1, Staggers Fall 2014

USFT-STAGGERS-F14S13G1

5 Membri

8 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 10

Tutti i Tempi: 762