Salta al contenuto principale

Astro A50 Battery Replacement

Cosa ti serve

  1. Astro A50 Battery  Replacement, Battery: passo 1, immagine 1 di 3 Astro A50 Battery  Replacement, Battery: passo 1, immagine 2 di 3 Astro A50 Battery  Replacement, Battery: passo 1, immagine 3 di 3
    • In order to replace the battery you must completely dissemble the ear piece with the mic. First, remove the foam cushions from the earpiece. Do this by simply pulling the foam away from the earpiece.

    • Remove the 4 screws with a small Phillips head screw driver.

  2. Astro A50 Battery  Replacement: passo 2, immagine 1 di 3 Astro A50 Battery  Replacement: passo 2, immagine 2 di 3 Astro A50 Battery  Replacement: passo 2, immagine 3 di 3
    • Once the black, plastic cover is removed, proceed to remove the two marked visible screws. Next, peel back the foam in the top left and right corners of the speaker (During reassembly this will need to be re-glued.) Once the screws are exposed, remove them with the same screwdriver.

  3. Astro A50 Battery  Replacement: passo 3, immagine 1 di 2 Astro A50 Battery  Replacement: passo 3, immagine 2 di 2
    • Once the all the screws have been removed, gently fold the speaker over to expose the internals of the earpiece. Be sure to use caution and avoid breaking wires.

    • Remove the 4 visible screws (Be sure to use caution.) These screws remove the faceplate on the outside of the headset.

  4. Astro A50 Battery  Replacement: passo 4, immagine 1 di 2 Astro A50 Battery  Replacement: passo 4, immagine 2 di 2
    • Once all the screws have been removed, turn the earpiece over. Then, rotate the microphone and cover plate away from the battery housing (This will expose the battery.)

    • Desolder and disconnect the wires from the old battery.

    • The battery is glued in the case. Wedge a plastic opening pick or spudger under the battery to break the adhesive. Do not bend or puncture the battery.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 40 persone hanno completato questa guida.

Team

UMass Dartmouth, Team 2-5, Shastany Fall 2015 Membro di UMass Dartmouth, Team 2-5, Shastany Fall 2015

UMASSD-SHASTANY-F15S2G5

4 Membri

10 Guide realizzate

32 Commenti

Could you post the dimensions of the battery itself? Seems like it's hard to find one that may or may not fit. That or could you recommend where to get a battery?

lolubad umad - Replica

i'd also like to know where to source the battery

drbob44 - Replica

Search for part no: 603443 on Ebay - ~$10 or buy one from Astro for $75

mattgorringe - Replica

So, which battery is the best replacement for the original? Is it possible to put some bigger batteries inside with some modding?

Rene Siekmann - Replica

Battery sizes are mAH, just by a 900 or more and that should do the trick. The actual size of the battery must be identical for a perfect fit and confortable headsets. Just make sure you get the correct voltage and size.

The battery comes with a cable, instead of soldering, can I tie those cables in? Also, what is the best way to remove and reattach foam cushions without damaging them?

cpaalvarez - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 22

Ultimi 7 Giorni: 142

Ultimi 30 Giorni: 629

Tutti i Tempi: 92,389