Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 4

Passo 4
Once all the screws have been removed, turn the earpiece over. Then, rotate the microphone and cover plate away from the battery housing (This will expose the battery.) Desolder and disconnect the wires from the old battery.
  • Once all the screws have been removed, turn the earpiece over. Then, rotate the microphone and cover plate away from the battery housing (This will expose the battery.)

  • Desolder and disconnect the wires from the old battery.

  • The battery is glued in the case. Wedge a plastic opening pick or spudger under the battery to break the adhesive. Do not bend or puncture the battery.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.