ATF 6000 7000
ELECTROLUX MAJORAPPLIANCES OF NORTH AMERICA
SERVICE MANUAL
AFFINITY
HORIZONTALAXIS
WASHER
6000 & 7000
SERIES
5995456851 April 2006
1
1111111
SAFE SERVICING PRACTICES - ALL APPLIANCES
Toavoid personalinjuryand/orpropertydamage,itisimportantthat SafeServicing Practices beobserved. Thefollowingaresomelimitedexamplesofsafe practices:
- DO NOT attempt a product repair if you have any doubts as to your ability to complete it in a safe and satisfactory manner.
- Before servicing or moving an appliance:
- Removethepowercordfromtheelectricaloutlet,tripthecircuitbreakertothe OFFposition, or remove the fuse.
- Turnoffthegassupply.
- Turnoffthewatersupply.
- Neverinterfere with the proper operation of any safety device.
- USEONLYREPLACEMENTPARTSCATALOGEDFORTHISAPPLIANCE. SUBSTITUTIONS MAY DEFEAT COMPLIANCE WITH SAFETY STANDARDS SET FOR HOME APPLIANCES.
- GROUNDING : Thestandardcolorcodingforsafetygroundwiresis GREEN , or GREEN with YELLOW STRIPES . Ground leads are not to be used as current carrying conductors. It is EXTREMELY important that the service technician reestablish all safety grounds prior to completion of service. Failure to do so will create a hazard.
- Prior to returning the product to service, ensure that:
- All electrical connections are correct and secure
- All electrical leads are properlydressedand securedawayfromsharpedges, high-temperaturecomponents,andmovingparts
- Allnon-insulatedelectricalterminals,connectors,heaters,etc.areadequately spaced away from all metal parts and panels
- All safety grounds (both internal and external) are correctly and securely connected
- All panels are properly and securely reassembled
ATTENTION!!!
This service manual is intended for use by persons having electrical and mechanical training and a level of knowledge of these subjects generally considered acceptable in the appliance repair trade. Electrolux Home Products cannot be responsible, nor assume any liability, for injury or damage of any kind arising from the use of this manual.
©2006WhiteConsolidated Industries
| SAFESERVICING PRACTICES | 2 |
|---|---|
| QUICKREFERENCESHEET | 7 |
| Serial nameplate location | 7 |
| Serial number breakdown | 7 |
| Tech sheet location | 7 |
| Component resistance chart | 8 |
| Water fill height | 8 |
| Electrical requirements | 8 |
| Incoming water pressure | 8 |
| Drain requirements | 8 |
| Motor | 8 |
| Operation speeds | 9 |
| Tub pulley to motor pulley ratio | 9 |
| Tub capacity | 9 |
| Auto temp control temperature specifications | 9 |
| Sample schematic (6000) | 10 |
| Sample schematic (7000) | 11 |
| SECTIONA-INSTALLATIONINSTRUCTIONS | 12 |
| What to do if you smell gas | 12 |
| Pre-installation requirements | 12 |
| Tools required for installation | 12 |
| Electrical requirements | 12 |
| Circuit | 12 |
| Power supply | 12 |
| Outlet receptacle | 12 |
| Grounding requirements | 12 |
| Water supply requirements | 13 |
| Drain requirements | 13 |
| Rough-in dimensions Location of your washer | 14 16 |
| 16 | |
| Do not install your washer Minimum installation clearances | 16 |
| Unpacking | 16 |
| Drain hose installation | 17 |
| Installation | 18 |
| Leveling the washer | 18 |
| Replacement parts | 19 |
| SECTION B- Washer &Dryer Pedestal Installation Instructions | 20 |
| Washer Installation | 20 |
| Dryer installation | 22 |
| SECTIONC-OPERATINGINSTRUCTIONS(6000) | 25 |
| Before operating your washer | 25 |
| Operating steps | 25 |
| Cycle selection | 26 |
| Heavy duty Normal wash | 26 26 |
| Permpress | 26 |
| Quick | 26 |
| Delicates | 26 |
| Hand wash | 26 |
| Spin only | 26 |
| 26 | |
| Cycle settings water temperature | 26 |
| Wash/rinse Auto temp | 27 |
| Spin | |
| Speed | 27 |
Table Caption: This table of contents outlines a user manual for a washing machine, covering safe servicing practices, installation instructions for the washer and an optional pedestal, and operating instructions for the 6000 model, including details on cycle selection and settings.
| Soil level | 27 |
|---|---|
| Water Level | 27 |
| Cycle options | 27 |
| Stain clean | 27 |
| Extra rinse | 27 |
| Extended spin | 27 |
| Signal volume | 27 |
| Washer features | 27 |
| Delay start | 27 |
| Control lock | 28 |
| Estimated cycle time | 28 |
| Status lights | 28 |
| Start/Pause | 28 |
| Cancel | 28 |
| Cycle selection chart | 29 |
| SECTIOND-OPERATINGINSTRUCTIONS(7000) | 30 |
| Before operating your washer | 30 |
| Operating steps | 30 |
| Cycle selection | 31 |
| Deep Clean Sanitary | 31 |
| Heavy duty | 31 |
| Normal wash | 31 |
| Permpress | 31 |
| Delicates | 31 |
| Hand wash | 31 |
| Spin only | 31 |
| Cycle settings Wash/rinse water temperature | 32 32 |
| Auto temp | 32 |
| Spin Speed | 32 |
| Soil level | 32 |
| Water Level | 32 |
| Cycle options | 32 |
| Stain clean | 32 |
| Extra rinse | 32 |
| Extended spin | 33 |
| Signal volume | 33 33 |
| Washer features Delay start | 33 |
| Control lock | 33 |
| Estimated cycle time | 33 |
| Status lights | 33 |
| Drum light | 33 |
| Start/Pause | 33 |
| 33 | |
| Cancel | |
| Cycle selection chart SECTIONE-OWNER'SGUIDE | 34 35 |
| Product record | 35 |
| Your safety and the safety | 35 |
| of others is very important Important safety instructions | 35 |
| Read all instructions before using this washer | 35 |
| Prevent fire | 36 |
| Protect Children | 36 |
| Prevent Injury | 36 |
| 37 | |
| Washing procedures Sort laundry into loads that can be washed together | |
| Prepare items for washing | 37 38 |
Table Caption: This table appears to be an index or table of contents for a washing machine manual, listing features, operating instructions, and safety guidelines along with corresponding page numbers.
Table Caption: This table is a table of contents for a manual, listing various sections, topics, and their corresponding page numbers. It covers operational procedures, maintenance, troubleshooting, construction details, and warranty information for a washing machine.
Table Caption: This table provides a list of appliance disassembly and reassembly procedures, with each item indicating a specific part or step and its corresponding page number in a manual. The procedures cover various components, from the console and electronic controls to the drain pump, motor, and tub assembly.
QUICK REFERENCE SHEET
- Serial nameplate location:
Onthe inner liner of the loading door
Onthe left-hand bodyside behind the front panel.
- Serial number breakdown.
- Tech sheet location
QUICK REFERENCE SHEET
Component resistance chart.
Water fill height 3.5 ± .5 ' No load, start position of permanent press cycle.
Electrical component
Dispenser valve soleniods
Door lock solenoid
Pump motor
NTCThermistor dispenser
NTCThermistor heater
Water heater
M1TOM2
M2TOM3
M1TOM3
Resistance
@77
F(25
C)
800 ± 7%
1325 ± 10%
12 ± 7%
3K
4.8K
14 ± 10%
5.3 ± 7%
5.3 ± 7%
5.3 ± 7%
M4TOM5
118 ± 7%
**Table
