Logitech QuickCam Pro 9000 User Guide

Logitech QuickCam Pro 9000

2MP AutoFocus RightLight™2 RightSound

User's Guide

Contents

English ..... 3
Español ..... 10
Français ..... 17
Portugues ..... 24

Camera Features

Snapshot button Autofocus glass lens system Activity light Microphone Universal clip

Thank you for purchasing your new Logitech QuickCam Pro 9000, with an autofocus, glass lens system. This guide will help you install and get the best performance from your webcam.

し

2 Install the Software First

Install the software before plugging in the camera. Many of your camera's extended features, including autofocus, will not operate properly without the complete software installation.

Insert the installation CD into your CD-ROM/DVD-ROM drive. Your CD should start automatically. If it does not, follow the steps below:

• Double-click the My computer icon. Alternatively, click Start ▶ My computer.

• Right-click the CD-ROM/DVD-ROM drive icon, and then click Autoplay.

3 Connect Your Camera to Your Computer

The image is too blurry to recognize any text content.

Wait until you are prompted by the software before connecting your camera to an available USB port on your computer.

4 Position Your Camera, Microphone, and Speakers

Your camera comes with Logitech $ ^{®} $ RightSound $ ^{™} $ Technology. RightSound $ ^{™} $ Technology cancels echo and significantly reduces background noise. The following steps will ensure the best possible audio performance:

Position your camera in the middle of your monitor for optimal eye contact.

Position your camera's microphone no more than 3 feet (1 m) away from you and point it toward you.

Position your speakers (if used) at least 12 inches (30 cm) away from your microphone to reduce feedback, and then angle your speakers away from your microphone.

Tip Do not place objects between you and the microphone.

5 The Audio Tuning Wizard

😊

☐

The first time that you start QuickCam, you are guided through the Microphone/Speaker Setup Utility and Audio Tuning Wizard that lets you do the following:

• Select the audio input device (microphone) and audio output device (speakers).

• Enable Acoustic Echo Cancellation (AEC)—recommended.

Enable background suppression—recommended.

• Specify microphone input volume and speaker output volume.

• Test audio settings.

In situations with loud and irregular background noise, your voice can become distorted when using noise suppression. If this occurs, disable noise suppression in the QuickCam software.

Tip To change your audio settings in the QuickCam software, click the Settings button, and then click the Audio tab.