DLE3170W
ELECTRIC & GAS DRYER SERVICE MANUAL
CAUTION
READ THIS MANUAL CAREFULLY TO DIAGNOSE PROBLEMS PROPERLY AND TO PROVIDE QUALITY SERVICE SAFELY ON THESE DRYERS.
MODEL : Electric Gas DLE3170W DLG3171W
IMPORTANT SAFETY NOTICE
The information in this service guide is intended for use by individuals possessing skill and experience in electrical, electronic, and mechanical appliance repair. Any attempt to repair a major appliance may result in personal injury and property damage. The manufacturer or seller cannot be responsible for the interpretation of this information, nor can it assume any liability in connection with its use.
To avoid injury to persons disconnect power before servicing this product. If electrical power is required for diagnosis or test purposes, disconnect the power immediately after performing the necessary checks.
RECONNECT ALL GROUNDING DEVICES
If grounding wires, screws, straps, clips, nuts, or washers used to complete a path to ground are removed for service, they must be returned to their original position and properly fastened.
WHAT TO DO IF YOU SMELL GAS:
- ᵉ Do not try to light a match, or cigarette, or turn on any gas or electrical appliance.
- ᵉ Do not touch any electrical switches. Do not use any phone in your building.
- ᵉ Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's instructions carefully.
- ᵉ Clear the room, building or area of all occupants.
- ᵉ If you cannot reach your gas supplier, call the fire department.
IMPORTANT
Electrostatic Discharge (ESD) Sensitive Electronics
ESD problems are present everywhere. ESD may damage or weaken the electronic control assembly. The new control assembly may appear to work well after repair is finished, but failure may occur at a later date due to ESD stress.
- એ Use an anti-static wrist strap. Connect wrist strap to green ground connection point or unpainted metal in the appliance.
- OR -
Touch your finger repeatedly to a green ground connection point or unpainted metal in the appliance.
- એ Before removing the part from its package, touch the anti-static bag to a green ground connection point or unpainted metal in the appliance.
- એ Avoid touching electronic parts or terminal contacts; handle electronic control assembly by edges only.
- એ When repackaging failed electronic control assembly in anti-static bag, observe above instructions.
CONTENTS
| 1. SPECIFICATIONS ............................................................................................................... | 4 | |
|---|---|---|
| 2. FEATURES AND BENEFITS ............................................................................................... | 6 | |
| 3. INSTALLATION INSTRUCTIONS .........................................................................................7 | ||
| 4. DRYER CYCLE PROCESS................................................................................................ | 13 | |
| 5. COMPONENT TESTING INFORMATION ......................................................................... | 14 | |
| 6. MOTOR DIAGRAM AND SCHEMATIC ............................................................................. | 17 | |
| 7. WIRING DIAGRAM ............................................................................................................ | 18 | |
| 8. FLOW SENSOR FUNCTION ............................................................................................. | 20 | |
| 8-1. FLOW SENSOR ....................................................................................................... | 20 | |
| 8-2 Installation check ........................................................................................................ | 21 | |
| 8-3 Troubleshooting for flow sensor dryer......................................................................... | 23 | |
| 8-4. Troubleshooting with Error......................................................................................... | 25 | |
| 9. DIAGNOSTIC TEST .......................................................................................................... | 33 | |
| 9-1. TEST 1 | 120V AC ELECTRICAL SUPPLY ............................................................. | 34 |
| 9-2. TEST 2 | THERMISTOR TEST - MEASURE WITH POWER OFF .......................... | 37 |
| 9-3. TEST 3 | MOTOR TEST | .......................................................................................... 38 |
| 9-4. TEST 4 | MOISTURE SENSOR ............................................................................... | 39 |
| 9-5. TEST 5 | DOOR SWITCH TEST .............................................................................. | 40 |
| 9-6. TEST 6 | HEATER SWITCH TEST - ELECTRIC TYPE ........................................... | 41 |
| 9-7. TEST 7 | GAS VALVE TEST - GAS TYPE | ............................................................... 42 |
| 10. CHANGE GAS SETTING (NATURAL GAS, PROPANE GAS) ....................................... | 43 | |
| 11. DISASSEMBLY INSTRUCTIONS .................................................................................... | 45 | |
| 12. EXPLODED VIEW ............................................................................................................ | 52 | |
| 12-1. CONTROL PANEL AND PLATE ASSEMBLY.......................................................... | 52 | |
| 12-2-1. CABINET AND DOOR ASSEMBLY: ELECTRIC TYPE ....................................... | 53 | |
| 12-2-2. CABINET AND DOOR ASSEMBLY: GAS TYPE ................................................. | 54 | |
| 12-3-1. DRUM AND MOTOR ASSEMBLY: ELECTRIC TYPE ......................................... | 55 | |
| 12-3-2. DRUM AND MOTOR ASSEMBLY: GAS TYPE ................................................... | 56 |
Table Caption: This table appears to be a table of contents for a service manual or technical guide for a dryer, likely detailing its specifications, features, installation, operation, troubleshooting, and repair. It includes sections on various electrical and mechanical components, diagnostic tests, and exploded views for disassembly.
**Table Caption: This table presents information in a key-value format, where keys are hexadecimal codes, and values are their decoded
