TP-Link Archer AX6000 Quick Installation Guide

►

Set up with videos:

☐☐

1 Connect the Hardware

！

• Unplug the power to turn off your modem, if any, and remove the backup battery if it has one.

• Place the router horizontally and orient the antennas vertically.

Unplug the power Modem

If your internet connection is through an Ethernet cable directly from the wall instead of through a DSL / Cable / Satellite modem, connect the Ethernet cable to the router's WAN port, and then follow steps 3 and 4 to complete the hardware connection.

1 Connect the powered-off modem to the router's WAN port with an Ethernet cable. 2 Power on the modem, and then wait about 2 minutes for it to restart. 3 Connect the power adapter to the router and turn it on.

Power on the modem, and then wait about 2 minutes for it to restart.

4

Connect the power adapter to the router and turn it on.

Verify the

Q

_ED on the top is solid on (red or blue) before moving on.

2 Set Up the Network

Method ONE: Via TP-Link Tether App

1. Download the Tether app.

Download on the App Store GETT ON Google Play

☐☐☐

Scan for Tether

Tether

🏠

2. Open the Tether app and log in with your TP-Link ID.

Note: If you