Logitech YETI NANO Repair

The YETI NANO is a compact USB condenser microphone designed for podcasting, streaming, and home recording. It uses a durable metal chassis and included desktop stand for stability and everyday use. Key features include selectable polar patterns (cardioid and omnidirectional), 24-bit/48 kHz digital audio, and a built-in headphone output for zero-latency monitoring.

The Logitech YETI NANO can be identified by the model number (M/N A00098). The model label is on the underside of the microphone. This label lists the model (M/N), part (P/N), and serial (S/N) numbers.

• Form Factor: Desktop USB condenser microphone
• Polar Patterns: Cardioid and Omnidirectional (switchable)
• Capsule: Custom 14 mm condenser capsule (single-capsule design)
• Bit Depth / Sample Rate: 24-bit / 48 kHz
• Connectivity: USB-C to USB-A (2.0) cable included; USB bus-powered
• Headphone Output: 3.5 mm zero-latency headphone jack with volume control
• Controls: Mute button and headphone volume knob; pattern selector
• Frequency Response: 20 Hz – 20 kHz
• Weight: Approximately 350 g (with desktop stand)
• Spare Parts / Downloads (per support page): No spare parts or downloads listed on official support page

Common repair-relevant faults include no audio (often caused by USB/cable failure or muted software settings) and intermittent headphone monitoring. Diagnose by testing with a known-good USB cable/port, checking system input/mute settings, and verifying the microphone is recognized by the OS; for headphone faults, test the 3.5 mm jack with another headset and inspect the cable/connector for damage.

For additional troubleshooting help, visit: Refer to Logitech Support (Yeti Nano FAQ) for product assistance; the support article notes there are no downloads or spare parts listed for this product.

Limited hardware warranty varies by region—contact Logitech support or check the product warranty page for your country.

• https://support.logi.com/hc/en-us/articl...