Aiuto Hilti Hammer Drill TE500 (2011): scopri come ripararlo da solo.

The Hilti Hammer Drill TE500 (2011) is an electrical demolition hammer manufactured by the Hilti company. Hilti introduced its first hammer drill model, the TE17, in 1967. The company continued to manufacture different hammer and breaker models and today sells a range of powerful hammer and breaker tools that are all part of the TE series.

The Hilti Hammer Drill TE500 is part of a range of Hilti TE hammer models. Like other Hilti hammer models, the TE500 has a powerful performance capacity for handling tough materials. This model’s standout features are its compact and low-weight design. Although it has a lighter build, it offers enough power for breaking and chiseling concrete and masonry. The detachable supply cord allows workers to replace damaged cords. The TE500 is intended for construction, installation, and repair by professionals at job sites or knowledgeable individuals with hammer drill experience.

The TE500 has not been discontinued and appears on Hilti’s online website in the United States as of April 21, 2024. While Hilti products are available in many countries worldwide, this specific model may not be available for purchase.

Hilti uses a distinctive red color on all its products, including the TE500. The Hilti logo accompanies the model number, and both can be found opposite the tool’s rear grip. If the logo is no longer visible, the nameplate on the tool provides the model number, such as TE500, the generation number, serial number, and manufactured date.

Weight without battery: 10.8 lb.

Dimensions (LxWxH): 16.5 x 4.1 x 9.4 in

Working direction: Wall

Tool chuck type: TE-Y (SDS Max)

Impact energy: 5.2 ft-lbs

Full hammering frequency: 3228 impacts/minute

Maximum chiseling performance: 52 in³/min

Triaxial vibration for chiseling into concrete: 13.5 m/s² ¹

Sound pressure level: 84 dB (A) ²

Source: Hilti TE 500 SDS Max Demolition Hammer

Hilti’s Official Page

Hilti Hammer Drill TE500 Operating Instructions Manual