Wiki con Collaborazione Studenti
Un fantastico team di studenti del nostro programma educativo ha realizzato questo wiki.
Flash is not working
When taking a picture, the flash does not go off.
Flash is not raised
If the flash mechanism is not raised, the flash will not go off. Press the release button on the top-left of the camera to raise the flash.
Flash is not turned on
If the flash is raised, and it still does not go off, there is the chance that you might have turned off the flash in the settings. Go into the settings of the camera and select the flash option.
Flash mechanism is broken
If the flash is still not working after this, it is possible that the flash mechanism itself is broken. You have to replace the flash. Use our guide flash replacement guide.
No sound on camera
When replaying a video, there is no sound.
Reset power
If the sound is not working, you can try turning the camera on and off. This might restore default factory settings. Turn the camera off . Wait 10 seconds and then turn it back on.
Volume is muted
If there is still no sound after turning the camera on and off, the sound may be turned off in the settings. Go into the settings of the camera and check the volume of the sound.
Faulty speakers
If there is still no sound, even after the sounds has been turned on, you might have to replace the speaker. The speaker might not be working because it is broken or some wire came loose. Use our repair guide to replace the speaker.
Camera will not turn on
When you press the power button, the camera does not turn on.
Replace the batteries
If the camera does not turn on when you press the power button, try replacing the batteries. The compartment that houses the batteries is located on the bottom of the camera. There is a little switch that releases the cover. After replacing the batteries turn the camera on.
Faulty power switch
If you replace the batteries, and the camera still does not turn on, the power switch may be broken. If the wires that connect the batteries to the power button are broken, the camera won’t turn on. To replace the power button, you can follow our guide here.
Memory on camera is full
Take a picture, a message pops up on the display saying that the camera is full.
Delete unwanted photos
Most cameras have a limited amount of space to store pictures. If you have filled up all the space with pictures you will not be able to take any more. By deleting pictures, you will gain space. To delete pictures, go to the menu and follow the steps to delete the desired pictures.
Insert new memory card
Memory cards provide additional storage for photos and videos. Turn the camera over. On the bottom is the compartment for the batteries. The slot for the memory card is in this compartment as well. Open the compartment. Press the memory card into the slot.
No pictures visible on screen
The camera is on but there is nothing visible on the display.
Check settings for contrast
It is possible that you may have accidently made the screen too dark to see anything. Go into the settings of the camera and make sure that the contrast is set appropriately.
Replace the screen
If the camera was dropped recently, the screen may be broken. Check for any visible cracks. If visible cracks are found, the screen many need to be replaced. There is currently no repair guide available on iFixit.
Team
UMass Dartmouth, Team 4-2, Vijaybhaskar Spring 2015 Membro di UMass Dartmouth, Team 4-2, Vijaybhaskar Spring 2015
UMASSD-VIJAYBHASKAR-S15S4G2
3 Membri
6 Guide realizzate
18 Commenti
left back button does not function
nigewilson - Replica
I have fujifilm finepix s2980 it's lens are stuck and it was no turned on not started
Please help me
I can't speak English very well
epunsenasri54 - Replica
I have problem with my fine pix s2980 every time I turn on its comes up with message saying turn off the cemera and turn on again and I can't work out why plz help me only it's hardly had any use
Chris rideout - Replica
I have the same problem
David Fairless -
I have problem with my fin pix s2980 a every time I turn on its comes up with message saying turn off the cemera and turn on again and I can't work out why plz help me
David Fairless -
I have problem with my fin pix s2980 a every time I turn on its comes up with message saying turn off the camera and turn on again
Beenish Aziz - Replica
When turning the camera on it comes on the screen (turn camera off then on again)when doing so nothing changes?
Howard Morrison - Replica
This may be too late to help but I promise it is perfectly true. I had the same problem with mine after a few years of trouble free use. After reading the comments here I decided to investigate or throw it away and get a replacement. Being a little mechanical I decided that nothing would be lost by trying to determine the fault. The very small screws in the case proved very hard to remove and as so very often happens there is always ONE! after numerous attempts I resorted to taps with a small hammer on the top of the small screwdriver to try and create a little more groove and get the screw to move. After starting to get a little aggressive and still no movement I decided to give up as I reasoned HAMMERING WOULD NOT SOLVE ANYTHING OR WOUD IT ? So in a last despairing gesture I switched back on and LOW & BEHOLD the camera now works fine again !! Can’t guarantee this method but I promise it worked for me and scored Brownee points from my wife who bought it me as a birthday present
brian - Replica
thank you Brian I have just solved the same problem by giving mine several taps on the bottom of camera and lo and behold when I swtched back on it works as normal.
Regards Peter.
Peter Raybould -
I have a FinePix S2950. I get a “Card Not Initialized” error. I’ve tried all the things in the user manual…I tried to reformat the memory card…which used to work fine; I cleaned the contacts, I used an air duster to blow out the internal camera contacts; I bought a new memory card..it always gives me the same response…Card Not Initialized. I tried the memory card in a different camera and it works fine. Help!
DavidPorter - Replica
Hi have tried taking photos, appear to take them no problem but cannot view afterwards. When press review button, nothing happens get message in viewfinder NO IMAGE.
Any ideas?
Kevin
Kevin - Replica
hi… i have very unusual problem with my camera as well… it doesn’t want to take a photo.. i can focus, but do not take photo… even some times its not want to focus too… is it possible to be any software issue?
Sabri Halil - Replica
My S2900 does not accept AC designed mains adaptor? Wide problem apparently?
richard paterson - Replica
Am advised the FinePix Digital S2900 is not wired to operate with AC mains adaptor although part available as available additional!
richard paterson - Replica
When I power my camera on it tells me to power it off on and back on and then it has a camera with an exclamation point icon on the screen and it will not allow me to take pictures zoom in or zoom out research says that there is a lens stuck is there a way that I can repair this myself
Jennifer Spence Swift - Replica
my FinePix Digital S2980 camera keeps going into continues mode.
Derek Hutchinson - Replica
Mode Dial is slow to react
richardmaxbryla - Replica
The tapping on the base works, I am shocked it came up with, No memory Card, Turn off and back on again what a weird example of old time mending.
Philip Bezer - Replica