Xbox 360 Jasper Parts
Replacement parts for your Xbox 360 Jasper model to fix your broken device!
iFixit has you covered with parts, tools, and free repair guides. Repair with confidence! All of our replacement parts are tested to rigorous standards and backed by our industry-leading warranty.
Scegli una Categoria
Parti che funzionano con Xbox 360 Jasper:
Arctic Silver Thermal Paste
Forms a continuous, heat conductive layer between a processor and its heat sink. A new layer of thermal paste keeps your processor from overheating. 3.5 grams
Arctic Silver ArctiClean
Two part cleaner dissolves old thermal paste on heat sinks and processors. One 30 ml bottle of thermal material remover and one 30 ml bottle of thermal surface purifier.
Xbox 360 Red Ring of Death Fix Kit
Fix kit for Xbox 360 consoles with the "Red Ring of Death" (RRoD) failure. Replace, reattach, and reclamp the heat sinks on your Xbox 360. Usually fixes a RRoD Xbox—als...
Xbox 360 Dual Fans (Late Models)
Replace the dual cooling fans with power cable and three-pin connector for late model (all except Xenon) Xbox 360 consoles. Fix overheating issues.
Xbox 360 Faceplate
Replace the plastic face plate including the USB & memory card doors.
Xbox 360 Optical Drive Tray Cover & Eject Button
Replace the plastic optical drive tray cover and eject button.
Xbox 360 HDD Enclosure
Replace the plastic and metal hard drive enclosure that snaps onto the the Xbox 360. This part does not include a hard drive.
Xbox 360 Optical Drive SATA Cable
This short black SATA cable transfers data between the motherboard and optical drive.
Xbox 360 HDD
Replace the hard drive with its plastic and metal hard drive enclosure that snaps onto the the Xbox 360 console.
Xbox 360 Upper Case
Replace the plastic outer casing covering the top half of the Xbox 360.
Xbox 360 Jasper GPU Heat Sink
This GPU heat sink with attached mounting posts is for the Xbox 360 Jasper console. Thermal paste is not included.
Xbox 360 Lower Case
Replace the plastic outer casing covering the lower half of the Xbox 360.
Xbox 360 Jasper Motherboard and Paired Optical Drive
Replace the motherboard for Xbox 360 Jasper with its paired optical drive. Heat sinks are not included.
Xbox 360 X Clamps
Replace the two X clamps for securing the CPU and GPU heat sinks.
Xbox 360 Chassis
Replace the stamped steel chassis that provides structural support inside the Xbox 360.
Xbox 360 RF Module
This small circuit board houses the electronic power button and LED status lights.
Xbox 360 Motherboard Screw Set
This set of screws secures the motherboard to the chassis.
Xbox 360 Bottom Vent
This gray plastic perforated vent covers the bottom face of the Xbox 360.
Xbox 360 Upper Case Screw Set
This set of screws secures the upper case to the chassis.
Xbox 360 Eject Button
Replace the plastic eject button.
Informazioni Dispositivo
The Xbox 360 Jasper revision was released in late 2008. This revision features CPU and GPU chips both manufactured with a 65 nanometer process. Thanks to the power reduction from the improved electronics, this revision of the Xbox 360 only requires a 150 watt power supply.