Salta al contenuto principale

Cosa ti serve

Questo smontaggio non è una guida di riparazione. Per riparare il tuo iClicker, usa il nostro manuale di assistenza.

  1. iClicker Teardown, iClicker Teardown: passo 1, immagine 1 di 1
    • Remove the battery cover

  2. iClicker Teardown: passo 2, immagine 1 di 2 iClicker Teardown: passo 2, immagine 2 di 2
    • Remove the two AAA batteries

  3. iClicker Teardown: passo 3, immagine 1 di 3 iClicker Teardown: passo 3, immagine 2 di 3 iClicker Teardown: passo 3, immagine 3 di 3
    • Remove the three screws using a screwdriver

  4. iClicker Teardown: passo 4, immagine 1 di 2 iClicker Teardown: passo 4, immagine 2 di 2
    • Remove the back cover

  5. iClicker Teardown: passo 5, immagine 1 di 2 iClicker Teardown: passo 5, immagine 2 di 2
    • Remove the positive and negative battery contacts using pliers

  6. iClicker Teardown: passo 6, immagine 1 di 1
    • Remove the circuit board

  7. iClicker Teardown: passo 7, immagine 1 di 1
    • Remove the soft touch buttons

  8. iClicker Teardown: passo 8, immagine 1 di 2 iClicker Teardown: passo 8, immagine 2 di 2
    • Full IC Identification:

    • Predicted Block Diagram is on the 2nd image.

    • You may need to enlarge it to view the text.

  9. iClicker Teardown: passo 9, immagine 1 di 1
    • You're done!

Vicente Rios

Membro da: 01/25/17

708 Reputazione

6 Guide realizzate

Team

Cal Poly, Team 9-4, Banghart Winter 2017 Membro di Cal Poly, Team 9-4, Banghart Winter 2017

CPSU-BANGHART-W17S9G4

4 Membri

11 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 9

Tutti i Tempi: 677