Strumenti necessari in questo Smontaggio

Introduzione

This is a step by step teardown of a Logitech webcam which is helpful if you are trying to build a stereo camera and remove the infrared filter or even simply adjust the focus.

Questo smontaggio non è una guida di riparazione. Per riparare il tuo Logitech 2-MP Webcam C600, usa il nostro manuale di assistenza.

  1. Buy a Logitech 2-MP Webcam C600, model number: 960-000395

    Aggiungi Commento

  2. Pry off the button mounted on the side
    • Pry off the button mounted on the side

    • Green arrow indicates the location of screw hole

    • Use a #0 Phillips head screwdriver to remove the screw

    Aggiungi Commento

  3. Diffondere allegria Fixmas
    Ottieni $12 sul tuo acquisto di $50 o più con il codice FIXMAS12
    Diffondere allegria Fixmas
    Ottieni $12 sul tuo acquisto di $50 o più con il codice FIXMAS12
    • Remove the screw indicated by the green arrows

    • The lens can be screwed and unscrewed to adjust focus. However it is glued in place and should be reglued after adjustment

    Aggiungi Commento

    • The screws indicated by the blue arrows hold the lens module in place

    • The infrared filter is accessible from the back of the lens module. It is the shiny piece of reddish glass.

    Aggiungi Commento

    • Attached to the white plastic is the privacy shade position sensor.

    • The ccd sensor appears to be 1/3.2" Type sensor with 4:3 aspect ratio. With is 4.536mm x 3.416mm. Focal length is currently undetermined.

    • The lens is threaded M10x0.5, and testing seems to indicate that the sensor is a CCD with global shutter.

    Aggiungi Commento

I Heart Robotics

Membro da: 09/11/2009

210 Reputazione

3 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 38

Tutti i Tempi: 25,799