Salta al contenuto principale

Cosa ti serve

Questo smontaggio non è una guida di riparazione. Per riparare il tuo Apple USB Power Adapter, usa il nostro manuale di assistenza.

  1. Apple USB Power Adapter Teardown, Separating the input panel: passo 1, immagine 1 di 3 Apple USB Power Adapter Teardown, Separating the input panel: passo 1, immagine 2 di 3 Apple USB Power Adapter Teardown, Separating the input panel: passo 1, immagine 3 di 3
    • Use a hammer and a small chisel to carefully force the input panel open

    • Clamping the device helps prop the input panel open but, do not pull the panel away from the device forcefully, as there are small wires connected to the device components.

    • Be careful not to force the chisel into the device as you could damage internal components.

  2. Apple USB Power Adapter Teardown, Removing plastic casing: passo 2, immagine 1 di 2 Apple USB Power Adapter Teardown, Removing plastic casing: passo 2, immagine 2 di 2
    • Use dyke and pliers to cut outside casing to pry open the shell and remove the circuitry.

    • Recommend using hand saw to cut around the plastic.

    • Be careful not to cut forcefully as to prevent the internal components from getting damaged.

  3. Apple USB Power Adapter Teardown, Isolating internal components: passo 3, immagine 1 di 3 Apple USB Power Adapter Teardown, Isolating internal components: passo 3, immagine 2 di 3 Apple USB Power Adapter Teardown, Isolating internal components: passo 3, immagine 3 di 3
    • Isolate the internal electrical components from the casing

    • Recommend unsoldering the wires from the input panel.

    • For help desoldering connections, follow this useful guide on Come saldare e dissaldare componenti elettrici.

    • Use caution when soldering. The heated tip may cause damage to the board, the components, or burn you.

  4. Apple USB Power Adapter Teardown, Accessing individual components: passo 4, immagine 1 di 3 Apple USB Power Adapter Teardown, Accessing individual components: passo 4, immagine 2 di 3 Apple USB Power Adapter Teardown, Accessing individual components: passo 4, immagine 3 di 3
    • Unsolder components that connect to the bottom and top circuit boards.

    • Detach the top and bottom circuit boards from the plastic separator.

    • For help desoldering connections, follow this useful guide on Come saldare e dissaldare componenti elettrici.

    • Use caution when soldering. The heated tip may cause damage to the board, the components, or burn you.

  5. Apple USB Power Adapter Teardown, Exploration: passo 5, immagine 1 di 2 Apple USB Power Adapter Teardown, Exploration: passo 5, immagine 2 di 2
    • Observe that once the circuit boards are separated individual components can be accessed.

Juan Gonzalez

Membro da: 01/24/19

422 Reputazione

2 Guide realizzate

Team

Cal Poly, Team S18-G1, White Winter 2019 Membro di Cal Poly, Team S18-G1, White Winter 2019

CPSU-WHITE-W19S18G1

4 Membri

21 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 8

Ultimi 7 Giorni: 61

Ultimi 30 Giorni: 244

Tutti i Tempi: 16,035