Aggiusta la tua roba Comunità Store

The Mazda Capella was commonly known in markets outside Japan as the Mazda 626. The Mazda 626's sixth-generation was built on the GF platform and released in 1997 for the 1998 model year.

55 Domande Visualizza tutte

Opzioni

After driving on LPG, engine cannot run again for a while

I have mazda 626 lx 1998 lpg/gasoline. Initial ignition is always on gasoline and after start I can switch to LPG. Problem started recently when I drive on LPG and off the engine. After that I am not able to run it again for a while. This is usually happened during summer time. Seems to me that need to wait some relay to be opened and gasoline come to the engine. Anyone can help me with advise

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Sì No
Punteggio -1
Aggiungi un commento

1 Risposta

Filtra per:
Più utili Più recenti Più Vecchio
Risposta Più Utile

Opzioni

The original fuel pump relay is located in the relay box which is right next to the battery. The exact location within the box should be printed on the relay box cover.

You should test to see if it operating and sending power to the fuel pump. It is controlled by the Powertrain Control Module but I am not certain how the original gas controls interact with the LPG controls.

BILL

Questa risposta è stata utile?

Sì No
Punteggio 1

1 Commento:

There are two relays MAIN RELAY (B5B418811) and Z5A118821 which is relay for fuel pump. I found location of main relay but not sure for the location of relay for fuel pump.

da

Aggiungi un commento

Aggiungi la tua risposta

Goran Cabrilo sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 5

Tutti i Tempi: 445