My click wheel and power button is unresponsive

Question

iPod Nano 4th Generation

Model A1285 / 8 or 16 GB capacity

206 Domande Visualizza tutte

richie @richie98845

Rep: 13

1

Postato: 19 giu 2012

Opzioni

My click wheel and power button is unresponsive

I've had my 4th Generation Ipod for about 4 years now, and everything is fine i never dropped nor damaged it whatsoever. I used it one day and the click wheel became unresponsive and it shut down on me. I was able to turn it back on but the click wheel became unusable for me to shut it off or even shuffle around. Should i just take it to repair or is there any way i can save my money and fix it myself?

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Sì No

Punteggio 1

Aggiungi un commento

3 Risposte

Soluzione Prescelta

mayer @mayer

Rep: 685,3k

MacHale Enterprises

3,4k

1,1k

2,6k

Postato: 19 giu 2012

Opzioni

Here's the best answer I've seen on this issue: it seems that there is some design flaw on the the new curved casing on the 4th gen. i've been reading thru different posts and this seems to be a recurring problem and needs to be addressed by apple. the board/clickwheel after a lot of use loosens up and creating some form of unstable contact, a solution i found is by adding a firm backing to it. i did this by inserting a piece of thin plastic (thin old credit card would do) between the board and the aluminum casing on the bottom end of the iPod. tried this with 2 of my iPods and it worked. of course you need to take the bottom plastic cover and the aluminum connector support with the 2 screws first.

Why has my iPod click wheel stopped working?

Questa risposta è stata utile?

Sì No

Punteggio 2

Aggiungi un commento