Complete repair manual for the PSP Go, including battery upgrade and display repair instructions.

76 Domande Visualizza tutte

Why will my psp go not turn on?

When the power switch is pressed the green light flashes for a second, but the unit doesn't power up. When the unit is charging the charging light is on, but it still wont power up. When the unit is plugged into the PC it is not recognized. Without disassembling the unit I am not able to do anything else with it.

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 3

Commenti:

how to fix psp go wifi not supported

da

Aggiungi un commento

Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

Sfoglia il Nostro Negozio

5 Risposte

Risposta Più Utile

Nope, no Pandora's Battery for the Go. It has a simple two-conductor battery, that's it. If it has any power at all and isn't starting, it doesn't seem like a mechanical problem, but something wrong with the mainboard. I think it needs a trip to Sony, sorry.

Questa risposta è stata utile?

Punteggio 2

Commenti:

You might be able to use the "Pandora Battery" technique to unbrick it. I'm not sure how it's done on this model, but it wouldn't hurt to give it a try.

da

Aggiungi un commento

It sounds bricked, you should send it to Sony and see if they will replace it.

Questa risposta è stata utile?

Punteggio 1
Aggiungi un commento

buenas mi psp go estando encendida le quitaron la tapa de atras y no encendio mas y le pongo el cargador y prende el led naranja pero no enciende espero y me puedan ayudar sera algun fusible en la placa

Questa risposta è stata utile?

Punteggio 0
Aggiungi un commento

Blown Fuse maybe?

http://www.mr-vizitkin.ru/images/stories...

^^ Fuses for PSP GO.

The one on the right is for Audio - so the one *under* the metal shielding may well be your power Fuse. I would suggest testing with a multimeter to confirm.

If you are going to bridge it then a Circuit Writer pen is the easiest - just practice on something other than the psp so you get used to the flow.

Questa risposta è stata utile?

Punteggio 0

Commenti:

How do you get under the metal shields?

da

Ill be honest with you - they do pop off with a little pressure and a watchmakers screwdriver - just like on an iphone 3g main board. Just *break* the soldered joint and you will be under the shield.

da

Aggiungi un commento

you are a !@#$%^& idiot

Questa risposta è stata utile?

Punteggio 0
Aggiungi un commento

Aggiungi la tua risposta

Tom sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 17

Tutti i Tempi: 22,648