Aggiusta la tua roba Comunità Store

Repair guides and support for your LG TV.

1345 Domande Visualizza tutte

Opzioni

My Oled tv doesn´t turn on after bezel was bent,

Hi

I recently acquired an LG oled TV (OLED55CX6LA) for free. The tv won´t turn on after

the bezel around the screen was dented (very small dent!).

The TV only goes to standby and when I try to turn it on the relay clicks once and it goes back to standby. I tried disconnecting the four panel connectors to the T-con board one by one to no effect. I then disconnected the lower cable connecting the main board to the t-con board and then turned on the tv. Still no picture but the relay didn´t click when the cable was disconnected.

Any ideas on what the issue might be?

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Sì No
Punteggio 0
Aggiungi un commento

1 Risposta

Filtra per:
Più utili Più recenti Più Vecchio
Risposta Più Utile

Opzioni

At first this sounded like a possible power supply issue but since there was no relay click after you disconnected the mainboard I would suggest you check for any damages on your mainboard and your T-board. I believe the issue might be revealed there. Maybe the dent caused minor but critical damage?

Questa risposta è stata utile?

Sì No
Punteggio 1

1 Commento:

Hi, thank you for answering. I will take them out and let somebody look at them (I have very limited experience with electronic repair).

da

Aggiungi un commento

Aggiungi la tua risposta

Ágúst Ingvarsson sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 11

Tutti i Tempi: 66