Aggiusta la tua roba Comunità Store

A1706/ EMC 3071 — Lanciato nel novembre 2016, questo MacBook Pro introduce la Touch Bar OLED. Ha CPU Intel Core i5 dual-core "Skylake"e 4 porte Thunderbolt.

239 Domande Visualizza tutte

Opzioni

1RS fell off during battery replacement, fan on constantly

I recently replaced my battery, tested and it’s working fine.

I noticed when I initially removed the lower case a “1RS” was out of place. I’m not sure if this happened when I was removing the case.

  1. what is a 1RS?
  2. Can it be replaced (soldered back into place)
  3. Do I need a new part?

When I turned my MacBook on, the battery was working perfectly, charging etc, however the fan has been on constantly.

I’ve preformed a SMC, PRAM & NVRAM reset and the issue with the fan still exists.

Block Image

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Sì No
Punteggio 2
Aggiungi un commento

1 Risposta

Filtra per:
Più utili Più recenti Più Vecchio

Opzioni

@bmcdermott that is reference designator L3500 which is a PIM B062D-SM series 1.5UH 20% 12.5A 0.017OHM inductor. The series is hard to match but the inductor is available at places like this Even so the series is different, it will still fit the solder pads. If unsure of that download the datasheet for the inductor from the site I linked to and it will have the dimension for the solder pads on there. Does not look like it is related to your fan issue at all but it is part of the TBT 5V regulator circuit.

Questa risposta è stata utile?

Sì No
Punteggio 0
Aggiungi un commento

Aggiungi la tua risposta

Oonagh sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 18