Aggiusta la tua roba Comunità Store

6 Domande Visualizza tutte

Opzioni

Windows won’t boot after enabling SVM

I am taking a coding class and was instructed to enable SVM in my BIOS settings. Now after enabling it, Windows won’t boot. It says “there was a problem starting your PC” and just continues in this loop forever. I went back in to troubleshooting and restored the BIOS settings back to what they were, but it still won’t boot. I tried opening the laptop up and taking out the CMOS battery for a minute then turning it on again but same issue.

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Sì No
Punteggio 0
Aggiungi un commento

1 Risposta

Filtra per:
Più utili Più recenti Più Vecchio

Opzioni

Apparently this is a known issue. Great eh!

  • Just go into the BIOS/UEFI and set settings to Default by mouse click or pressing <F9> key. That should do it.
  • (this for other readers) This video is for the FX504 but the instructions are probably similar for the FX505.

ASUS TUF Gaming FX504 CMOS Battery

  • Did you disconnect the charger and the main battery when you took out the CMOS battery and press the power button to discharge any residue electricity?
  • Some suggest reflashing the UEFI/BIOS.
  • I would also run a full virus/ malware scan to be safe.

Let know how it goes.

Questa risposta è stata utile?

Sì No
Punteggio 0
Aggiungi un commento

Aggiungi la tua risposta

Teostra sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 16

Tutti i Tempi: 103