Salta al contenuto principale

Model A1059 or A1099 / 20, 40, or 60 GB hard drive / touch sensitive click wheel

227 Domande Visualizza tutte

iPod Classic: lost headphone ribbon cable clamp

I was just replacing the battery in my iPod classic and I pulled on the case just a touch too hard. The ribbon cable that controls the Headphone Jack and Hold Switch came loose from the motherboard. No big deal.

But when I tried to flip open the lock on the cable bracket/connector, the lock flew off the unit and into nowheresville. I can't find it anywhere. There is no damage to the actual cable connector, except that it is now missing the lock to press the cable securely.

Is there a replacement (without getting a new motherboard) for this fiddly little clamp? Or a reliable way to fabricate a replacement without fear that I'll have to keep opening the case to play with the connection?

Thanks!

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 0
Aggiungi un commento

1 Risposta

I think it's this one? https://www.ebay.co.uk/itm/265063671321 (I realise it's the batter connector, but it might fit the headphone socket too maybe?)

Done this myself as well, but I was lucky enough to be able to find it afterwards

Questa risposta è stata utile?

Punteggio 0
Aggiungi un commento

Aggiungi la tua risposta

Jeffrey L Bromberger sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 16

Tutti i Tempi: 48