Salta al contenuto principale

Repair guides for different types of storage devices, ranging from internal hard drives to network attached drives.

632 Domande Visualizza tutte

Is it possible to find QNAP TS-409U replacement parts

Is it possible to find reasonable cost replacement parts for a 1U QNAP NAS device? A QNAP TS-409U, no device page for any QNAP stuff yet.

I could use a new power supply for this model I listed above and have not been able to find anything from regular searches. I will be calling around during normal hours tomorrow, but thought it could not hurt to ask and see if anyone had a online resource i am not aware of for a device like this. ( i would hope a power supply would not be terribly expensive, this is my fear and another reason i am asking) these types of devices are fairly expensive to purchase and of course replace if not repair is not possible.

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 1
Aggiungi un commento

2 Risposte

Soluzione Prescelta

Brian, sure looks like a proverbial needle in a haystack. Looks like the TS409-U uses a Channel Well Technology (CWT) PSM 200A-89. The QNAP part number is SP-5BAY-PSU. The only values I can find are:

Input:115-230V, 47-63 Hz, 3.0A

+5V 13A 65W max

+3.3V 17A 56W max

+12V 15A 180W max

-12V 0.3A 3.6W max

+5V 2A 10W max

Here are a few suppliers, depending on your region. Looks like it's popular in Europe (and expensive;) http://eng.estock.fr/basketadd.php?partn... Here is the one from Qnap http://shop.qnap.com/index.php?route=pro... The layout and a bit more data on the power supply from here http://www.cwt.com.tw/upfiles/layout0123... Hope this helps, good luck.

Questa risposta è stata utile?

Punteggio 2

2 Commenti:

Fantastic, this is the kind of info i was hoping to find, sure beats buying another model, thank you.

da

Thanks for accepting my answer. Best of luck to you :)

da

Aggiungi un commento

Hey

I'm looking to replace the PSU in my 409U as well.

I am currently running it off a standard ATX PC PSU.

any ATX 1U PSU of apropriate wattage will do.

I have ssen a few on e-bay which can be made to fit but I am yet to find one that will directly replace the 15cm model on the NAS.

Questa risposta è stata utile?

Punteggio 0
Aggiungi un commento

Aggiungi la tua risposta

Brian sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 2

Tutti i Tempi: 4,349