Salta al contenuto principale
Unisciti alla Community delle riparazioni - Crea un account

saw starts runs wot will not idle down and run

will start and run at high speed will not idle replaced carb same results help

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 2

3 Commenti:

Throttle linkage incorrectly setup?

da

No It is set up proper. turned out to be a pinhole in the carburetor fuel pump

da

do you mean the metering diaphragm, i have the same issue where it will start and run at wot but as soon as i let off it dies within 10 seconds

da

Aggiungi un commento

1 Risposta

It could be that it is sucking air making it run lean and only at high RPM. Look at your spark plug what does it look like? Do a leak down test.

Check the compression of the motor.

Questa risposta è stata utile?

Punteggio 0
Aggiungi un commento

Aggiungi la tua risposta

PHILLIP sarà eternamente grato.
Visualizza statistiche:

Ultime 24 ore: 0

Ultimi 7 giorni: 6

Ultimi 30 giorni: 52

Tutti i Tempi: 475