Salta al contenuto principale

Modello A1312 / metà 2011 / Processore Core i5 da 2,7 e 3,1 GHz o Core i7 da 3,4 GHz, ID iMac12,2

708 Domande Visualizza tutte

Can someone tell me where the EFI chip is located

buongiorno, qualcuno mi sà dire dove si trova il chip EFI EFI bios sulla scheda madre imac 27" EMC 2429. Grazi

Good morning, can someone tell me where the EFI bios chip is on the imac 27" EMC 2429 motherboard. Thank you

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 1
Aggiungi un commento

2 Risposte

Italian: Puoi darci il problema che stai affrontando qui, il chip EFI raramente fallisce da solo.

Spesso il firmware al suo interno si mette nei guai. Il chip ha due regioni, uno spazio EEPROM e uno spazio RAM scrivibile che contiene le impostazioni del sistema (anche SMC). È qui che entra in gioco la batteria della PRAM per proteggerne la perdita. Spesso un sistema che non riesce ad avviarsi con una buona RAM nota e guidare con il sistema operativo corretto può essere attribuito a una batteria scarica. Puoi darci il problema che stai affrontando qui, il chip EFI raramente fallisce da solo.

English: Can you give us the problem you are facing here, the EFI chip rarely fails in its self.

Often the firmware within it gets into trouble. The chip has two regions an EEPROM space and a writable RAM space which holds your systems settings (SMC as well). This is where the PRAM battery comes in to protect its loss. Often a system which fails to boot up with good known RAM and drive with the correct OS can be attributed to a dead battery.

Questa risposta è stata utile?

Punteggio 0
Aggiungi un commento

@davideorlandini this is strictly to answer your question about the location. Not about the function or the architecture of the IC.

You iMac should be using a 820-2828 logic board. For that , here is the location of the IC

Translation

@davideorlandini questo è strettamente per rispondere alla tua domanda sulla posizione. Non riguarda la funzione o l'architettura del circuito integrato.

Il tuo iMac dovrebbe utilizzare una scheda logica 820-2828. Per questo, ecco la posizione del circuito integrato

Block Image

Questa risposta è stata utile?

Punteggio 0
Aggiungi un commento

Aggiungi la tua risposta

Davide Orlandini sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 31