Rep: 23
3
1
Sooo...
I was doing a shell swap on my ds lite and now the touchscreen doesnt work.
When changing the border around the bottom screen, a cleaar part came off with the border sticker which im guessing is the problem.
If anyone knows what happened can they please tell me wether i need to replace the screen or if its fixable with my current one.
Thanks to anyone who answers this.
Questa è una buona domanda?
Rep: 512
9
1
maybe you unplugged the digitizer or didn't plug it in at all,
Questa risposta è stata utile?
THere was a clear sticker with a border and what looks like contacts under the border
Hmm I think you unplugged digatizer
Rep: 109
3
1
What you pulled off was the digitizer, I believe that all you need to do is reattach the digitizer which may require to be glued back down, check if the semi clear ribbon cable is still connected, if not then you have found the issue, please reply to this answer with a photo of the board on both sides.
Good luck
Questa risposta è stata utile?
Ultime 24 Ore: 1
Ultimi 7 Giorni: 3
Ultimi 30 Giorni: 9
Tutti i Tempi: 47
what do you mean a "clear part"
da Sqwerks