Aggiusta la tua roba Comunità Store

Guides and repair information for washing machines produced by Samsung, a South Korean engineering and technology company.

103 Domande Visualizza tutte

Opzioni

No hot water WW80M645OPX/EU samsung qdrive washing machine

Samsung

Block Image

washing machine has no hot water. I have tested thermistor it appears fine. ohms resistance drops with hand heat. element is fine 2.2 ohms but when on washing cycle no hot water is created ive attached crocerdial clips to power input on element no voltage detected on terminal on heat part of cycle . I have replaced pcb board b dc92 02140a note no error coded shown on machine. I am out of ideas

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Sì No
Punteggio 0
Aggiungi un commento

2 Risposte

Filtra per:
Più utili Più recenti Più Vecchio
Soluzione Prescelta

Opzioni

in the end it was the wiring loom i had to strip down to locate and bridge broken wires.movement between drum and loom. I hope it helps others

Block Image

Questa risposta è stata utile?

Sì No
Punteggio 1

1 Commento:

@philippric92934 and that is the way to fix things :-) Great job and just in time to finish the weekend laundry!

da

Aggiungi un commento

Opzioni

Have you checked the filter element in the hot water hose?

If it is not that, then it is likely a bad water valve. There are 2. One for hot and one for cold.

Questa risposta è stata utile?

Sì No
Punteggio 0

1 Commento:

Uk machines use a single cold feed in the end it was a wiring loom issue. after stripping down the loom part of the thermistor circuit in the loom had snapped causing open circuit

da

Aggiungi un commento

Aggiungi la tua risposta

Philip Price sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 55