Aggiusta la tua roba Comunità Store

Samsung's flagship tablet, released in March 2017. Identified by model number SM-T820.

32 Domande Visualizza tutte

Opzioni

Does replacing the Charging Port Assembly require any SOLDERING

@dadibrokeit

Hi again Jerry :

Another question for you or anyone. Does replacing the above mentioned Charging Port Assembly ( Galaxy Tab S3 9.7 SM-T820) require any SOLDERING to replace?

Thanks in advance.

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Sì No
Punteggio 0
Aggiungi un commento

1 Risposta

Filtra per:
Più utili Più recenti Più Vecchio
Risposta Più Utile

Opzioni

Hi Barbara,

Assuming you're talking about the complete charging port assembly - the same one that's advertised here on iFixit - then no, you do not need to do any soldering to replace it.

Block Image

After going through the Daughterboard Replacement guide, here are the tools you need.

  • Heat source: heating pad / iOpener / heat gun / blow dryer
  • Opening pick(s) / plastic card
  • Suction cup
  • Phillips #000 screwdriver
  • Spudger

Samsung Galaxy Tab S3 Daughterboard Replacement - iFixit Repair Guide

It appears that iFixit is out of stock on those daughterboards, but you shouldn't have any trouble finding a replacement on places like Amazon, eBay or AliExpress. Here's an example.

Charging Port Board For Samsung Galaxy Tab S3 9.7 SM-T820 / T823 / T825 / T827

Questa risposta è stata utile?

Sì No
Punteggio 2
Aggiungi un commento

Aggiungi la tua risposta

Barbara J Maggiani sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 30