Aggiusta la tua roba Comunità Store

Released November 2018 as an edition to the iPad's Pro line. Model A1980.

63 Domande Visualizza tutte

Opzioni

Battery percentage not displayed

I tried to replace the LCD

I removed the LCD and inserted a plastic peak between the battery connector

after changing the LCD, I turned it on

battery percentage not displayed

The battery appears dead, but the power remains intact

charging cables charge between 0 and 10W

(usually between 0 and 5W)

3utools displays "No data"

The battery was 70 percent before it started

Does anyone know how to solve this problem?

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Sì No
Punteggio 0
Aggiungi un commento

1 Risposta

Filtra per:
Più utili Più recenti Più Vecchio
Risposta Più Utile

Opzioni

There are a couple common mistakes people can make in situations like this. One is they forgot to install the screw holding the battery connector or didn't secure it enough. The second is they may have damaged the battery connector on the board if they inserted the pry tool, which may require replacement. That can happen if you insert the pry tool directly into the battery connector. It's recommended that you insert the tool next to the battery connector.

Double check to make sure you put that battery connector screw back in place and it's secure. If that doesn't resolve the issue, you're going to need to lift up the board enough to get a look underneath so you can see the battery connector.

Questa risposta è stata utile?

Sì No
Punteggio 2
Aggiungi un commento

Aggiungi la tua risposta

KLAVIKA sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 36