Salta al contenuto principale

Impara a conoscere le competenze di cui potresti aver bisogno per lavorare sul tuo dispositivo.

87 Domande Visualizza tutte

What is this connector, and how do I reconnect the cable?

I have been fixing some bent keys on my Roland rd88, and is now trying to reconnect this cable and connector:

Block Image

Block Image

It seems there are no latches to open.

I have this picture of another, similar connector type elsewhere on the keyboard pcb, but mounted flat:

Block Image

Any help?

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 1
Aggiungi un commento

2 Risposte

Soluzione Prescelta

Hi

You see these sorts of connections on Roland products quite regularly and they are a push fit type

They can be quite stubborn to connect but the best way of slotting them in is by lining them up and pushing them into the slot by holding both sides of the cable in firmly

Try and keep the cable as square as you can to the slot to prevent damaging the cable

Hopefully this helps

Any questions please ask

Thanks:-)

Questa risposta è stata utile?

Punteggio 2
Aggiungi un commento

It's a slide-in type connector. Slide that back in and check of the component is working. This cable should be inserted vertically.

Questa risposta è stata utile?

Punteggio 1
Aggiungi un commento

Aggiungi la tua risposta

DonMeta sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 5

Tutti i Tempi: 78