Rep: 13
1
I recently bought an iPhone 8 that needed a new battery. I replaced the battery (from mobilesentrix.com) and it showed the battery health once and now whenever the phone is powered on the battery meter shows 1% remaining and in settings it says "Unable to determine battery health" in settings. Do I need to buy a new battery or is it something else? Thanks.
Questa è una buona domanda?
Rep: 1,6k
6
8
i've heard this was an issue with SE2020's, but not the 8 - i could be wrong.
supposedly the solution is to use a reprogrammer like JC V1SE to give the newbattery the SN/ID of the old battery so IOS thinks it's the one that was installed at the factory. not sure if there's an easy fix if you don't have a reprogrammer.
Questa risposta è stata utile?
Rep: 25,9k
205
22
38
Hi
I have had this issue with the iPhone 6S and I found reseating the connector sometimes works or just leaving it for a week or so
I have found each methods to work on different occasions:-)
Hopefully this helps
Any questions please ask
Thanks:-)
Questa risposta è stata utile?
Ultime 24 Ore: 0
Ultimi 7 Giorni: 6
Ultimi 30 Giorni: 7
Tutti i Tempi: 95
