Aggiusta la tua roba Comunità Store

Modello A1418 / Fine 2012 / Processore Core i5 da 2,7 e 2,9 GHz o Core i7 da 3,1 GHz

212 Domande Visualizza tutte

Opzioni

Kernel take about 90% from CPU

Good Day,

Im have problems, with Imac EMC2544, that Fan speed and very slow to do anything,

when I checked the Active Montier I saw the Kernel take about 90% from CPU , so I did clean install , it takes more than 14 hour to finished and the mouse moves so slow and it sometimes stop moving.

Thanks

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Sì No
Punteggio 0
Aggiungi un commento

1 Risposta

Filtra per:
Più utili Più recenti Più Vecchio
Risposta Più Utile

Opzioni

This behavior is pretty indicative of either an issue with overheating, or one of the sensors. Kernel task, if that’s what you’re referencing is a process responsible for many things, and one is sucking up CPU cycles from other processes that the device thinks may cause issues with heat, or stress the system.

This is also normal behavior if the Mac thinks one of its sensors is missing, or is giving bad readings. Try running Apple Diagnostics by pressing and holding the D key immediately after you hit the power button to turn your machine on.

Questa risposta è stata utile?

Sì No
Punteggio 2

2 Commenti:

Thanks ,

I have run diagnostics , it shows ( Error:080000000000003, Cannot Load EFI/Drives/TestSupport

Status: 0x00000003

da

@flannelist - Looks like Apple has struck again killing diags on older systems!

da

Aggiungi un commento

Aggiungi la tua risposta

Moe Shtewi sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 42