Aggiusta la tua roba Comunità Store

Modello A2116 / 2019 / processori i3 quad-core 3.6 GHz, i5 6-core 3.0 GHz oppure i7 6-core 3.2 GHz. Rilasciato il 19 marzo 2019.

78 Domande Visualizza tutte

Opzioni

Replacing Fusion Drive in 2017 and 2019 iMacs (Leaving New NVME Only)

I don't have a problem with the physical replacement which I know is involved, but I wanted to make sure I understand the technology of the Fusion Drive.

1. I am under the impression that it is okay to take out both drives, and just replace the NVME with a 1TB (blade) NVME drive, leaving the 2.5" drive out of the equation completely. Is this correct?

2. Is there any reason to go through the process of splitting the drive in the software if I will not be using either of the two original drives again, or will that have ramifications within the system after I install the new drive? I guess I'm asking if it's OS level changes or system changes. I've not looked too far into that aspect.

Thanks!

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Sì No
Punteggio 0
Aggiungi un commento

1 Risposta

Filtra per:
Più utili Più recenti Più Vecchio

Opzioni

Apple isn't so forthcoming, so what we did with the older systems and macOS's doesn't always translate to the newer systems and OS versions.

It's been awhile since I've done a de-fusion ;-} So I can't tell you if using Big Sur and newer alters things.

We do know Apple changed how Fusion drives were inter-linked with Catania requiring the blade cache drive be removed to install a replacement SATA drive (HDD or SSD). As it turns out the process of splitting the fusion drive set doesn't work.

So pulling both drives should allow you to install a replacement PCIe/NVMe drive.

Questa risposta è stata utile?

Sì No
Punteggio 0
Aggiungi un commento

Aggiungi la tua risposta

Joseph Turner sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 7

Tutti i Tempi: 123