Where do this rubber fittings go?

Question

MacBook Pro 13" Function Keys 2017

A1708 / EMC 3164 — Lanciato a giugno 2017, questo MacBook Pro entry-level conserva i tradizionali tasti funzione (invece della Touch Bar OLED.

563 Domande Visualizza tutte

GreyBoy @greyboy

Rep: 23

2

Postato: 16 ago 2022

Opzioni

Where do this rubber fittings go?

I'm re-assembling my macbbok Pro A1708 after a long wait to get my screen replacement and during the re-assemply process I found this two rubber fittings.

I thought they might fit in some vent or even in the USB C ports but I really don't know and decided to askbefore I do something wrong. Any ideas? There's only two of them which fit my USB C port theory ( 2 port model)

Thanks in advance for your help guys!

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Sì No

Punteggio 1

Aggiungi un commento

2 Risposte

Soluzione Prescelta

Kyle King @cpevv

Rep: 169

Computers Plus EVV

3

Postato: 16 ago 2022

Opzioni

These are the rubber gaskets that help prevent water, dirt, dust, etc. from getting into your USB-C ports. These most likely fell out whilst removing/moving your logic board and should be replaced and resealed immediately.
I recommend taking your time and following an in-depth repair guide video for your display replacement to ensure they are installed properly and that you did not miss anything else.

Just ask if there is anything else!

Questa risposta è stata utile?

Sì No

Punteggio 1

1 Commento:

@cpevv - The iFixit guide Sostituzione gruppo schermo MacBook Pro 13" Function Keys 2017 doesn't require taking out the logic board to replace the display assembly and I've never needed to either.

So while they look like the gaskets they normally stay on the connectors when you pull the logic board.

16 ago 2022 da Dan

Aggiungi un commento

@cpevv - The iFixit guide Sostituzione gruppo schermo MacBook Pro 13" Function Keys 2017 doesn't require taking out the logic board to replace the display assembly and I've never needed to either.

So while they look like the gaskets they normally stay on the connectors when you pull the logic board. — Dan