Aggiusta la tua roba Comunità Store

Revamped version of the iPhone 3G with faster processing speeds. Repair of this device is similar to the 3G, and requires simple screwdrivers and prying tools. Model A1303 / 8, 16 or 32 GB capacity / black or white plastic back.

1500 Domande Visualizza tutte

Opzioni

iPhone 3GS Coil problem

Hello,

i have problem with my iphone 3Gs.

I tried to replace the coil but when i wanted to remove the old coil the old solder pad (connector on the mainboard) was also removed.

So the problem is that i dont have only one point to solder the coil.

Is there any other solution to let the backlight work?

I found that but maybe there any other solutions:

http://s1.directupload.net/images/111222...

Please help me to find a solution.

Thanks

Update

Thanks for your information. Here a picture of it:

http://imageshack.us/f/560/cimg0661z.jpg...

Now it is easier for you to help me

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Sì No
Punteggio -1
3 Commenti

Have you got a photo of your damaged part on the board?

da

This is why I dread replacing the 6R8 coil so much, too easy to damage the logicbord(expensive!) I refuse to do this EXCEPT on iPhones given to me so if it fails, I can keep it for parts

da

Fuad, if you want to send it to me to take a look at, I can. No charge unless it is fixed.

da

Aggiungi un commento

1 Risposta

Filtra per:
Più utili Più recenti Più Vecchio
Risposta Più Utile

Opzioni

If there is even a hint of trace left, you can dig up the fiberboard and get a better connection to it. You could do that jumper trick, but it is a bit difficult to do if you don't have experience with this type of thing.

Questa risposta è stata utile?

Sì No
Punteggio 1
Aggiungi un commento

Aggiungi la tua risposta

Fuad sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 2,427