Rep: 13
1
What is my problem? Power button itself? The machine works flawlessly and has been used by a friend for 1.5 years and now me for three months. Zero issues aside from strange power button issue. Thanks for any insight.
Questa è una buona domanda?
Rep: 27,3k
77
33
52
The power button might need to be cleaned, as it might be sticking due to debris between the body of the Mac and the button. Otherwise, my assumption is that the issue could have something to do with the PSU. You can use this guide to get to it. See if you can find any damage to the board or the components on it (I.E, if any of the captors are bulging at the top).
Questa risposta è stata utile?
Rep: 480,3k
35
330
971
Follow this guide to Step 14, then jump down to Step 30 disconnecting the Power button connection Installazione della scheda logica nell'iMac Intel EMC 2428 da 21,5" Use an Ohm meter to test the button plugging into the cables connector. If it is working correctly (which I suspect it is) then we need to look deeper.
Th power button signal is feed thru SMC on the main logic board which then in turn enables the signal to the power supply to turn it on. This allows SMC to over-ride the power on signal when there is a problem within your system.
I would locate your original Grey CD/DVD's, one will be marked as a diagnostic disk, reboot under it lets see if diagnostics passes. Given the age of the system you might want to replace the PRAM battery as it's about time to replace it. That maybe in fact be your problem.
Questa risposta è stata utile?
Ultime 24 Ore: 0
Ultimi 7 Giorni: 9
Ultimi 30 Giorni: 29
Tutti i Tempi: 85
