Aggiusta la tua roba Comunità Store

Linea delle stampanti HP a getto di inchiostro

356 Domande Visualizza tutte

Opzioni

HP 8610: One or more cartridges appear to be damage!

Hi, I turn it on, it complains about a damaged cartridge, so I open the front door to replace.

When I open the door, the carriage does NOT move, and the error message now says to close the door to print.

 

I close the door, and the original damaged cartridge error message returns.

I read some article that says you should downgrade you r firmware and I tried to go service menu by 4 taps on back icon on left side of screen, but I can't get to any service menu, and I have tried unplugging, waiting and plugging back in, and I have tried forcefully moving the cartridge, but nothing works.

Anyone has any experience about this error?

Thanks,

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Sì No
Punteggio 1
Aggiungi un commento

1 Risposta

Filtra per:
Più utili Più recenti Più Vecchio

Opzioni

well, have you tried replacing the cartridge?

Questa risposta è stata utile?

Sì No
Punteggio 0

8 Commenti:

Yes, is there any way that I access to service menu when my printer has error?

da

let me check

da

if you open it then you can see a wire connecting to the cartridge , check that wire to see if its damaged

da

if that's not damaged then try to look at the connector between the cartridge and the connecter

the place where you place the cartridge

da

and finally yes, you can access to service menu when your printer has an error on these steps:

With the printer turned on, disconnect the power cord from the printer.

Unplug the power cord from the power source.

Wait 60 seconds.

Reconnect the power cord to a wall outlet and the printer.

da

Mostra altri 3 commenti

Aggiungi un commento

Aggiungi la tua risposta

megan D sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 8

Ultimi 30 Giorni: 30

Tutti i Tempi: 1,195