Salta al contenuto principale

Lanciato il 20 settembre, il telefono di punta di Apple per il 2019 ha display OLED da 5,8", tripla fotocamera posteriore e autonomia molto migliorata. È il successore dell'iPhone XS.

149 Domande Visualizza tutte

I’m ready to throw this phone across the room!

Replacing screen.

I’m on my second screen.

Everything is connected.

# Phone turns on, I can hear and feel the vibrations.

  1. Screen is responding to my touch.
  2. Screen is black, I cannot see anything of the screen and/or a very dimly Apple logo upon start up.
Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 0
1 Commento

I’m so frustrated!! I don’t know what to do

da

Aggiungi un commento

3 Risposte

Risposta Più Utile

This is the symptom of a faulty ambient light sensor. It might have got damaged during the screen replacement.

Questa risposta è stata utile?

Punteggio 2
Aggiungi un commento

hello David,

it seems to be like faulty new screen panel, it happens sometimes. But, most cases (you nothing write about a reason of change) its just a badly inserted screen connector into the port. Don't forget about first important electronic rule - battery firs when unplugging and the last when pluging.

It would be a good practice to go to a nearby repair shop and have your screen checked. It shouldn't cost a lot, just plug it in and check on another phone if it's not working. If, however, we'll wonder later.

Questa risposta è stata utile?

Punteggio 0

2 Commenti:

Thanks for the reply... I have two screens .. the first didn’t work, so I bought another.. do you think I could have damaged one of the prongs? Causing no light? Idk? It’s sitting away from me right now, as jt is so frustrating

da

it's hard to answer your question without touching the phone. The 11pro model has an OLED screen, so different rules apply here than in the LDC models. If the OLED screen does not work, if it is not damaged, it has a problem with the power supply. All the more, give the phone to a good repair shop, even for diagnostics. You will learn everything - you need to measure the ports with the current, check the screen. You may find that you now have two :-) working screens :-). Fingers crossed.

da

Aggiungi un commento

I'd second popping into a shop and see if they can test another screen for you.

You could try a soft reboot.

Or even dfu mode restore.

Sometimes, the aftermarket screens have ever so slightly bigger fpc connectors, and these can stretch out the board connectors, but this is rare.

Is It an oled or LCD replacement?

Questa risposta è stata utile?

Punteggio 0

1 Commento:

it is an oled screen

da

Aggiungi un commento

Aggiungi la tua risposta

David Johnson sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 122