Salta al contenuto principale

iPhone con schermo da 4" introdotto nel marzo 2016 con specifiche hardware simili a quelle dell'6s. Disponibile in Argento, Oro, Grigio siderale, Oro rosa con 16 o 64 GB. Modelli A1662 e A1723.

1053 Domande Visualizza tutte

Every 3 minutes my iPhone SE restarts

Hello. I just got a iPhone SE with everything original except display was touch irresponding on left side. So i just replaced the display with a new one and replaced housing bcs it was in very bad condition. Everything was fine. Max battery capacity was like 87%. I fixed it, tested it and everything was working perfectly. After like 2 days i turned on the iPhone and for me i knew something went wrong at this time. The battery stopped charging already. 3uTools showed me “no data” on battery and every 3 minutes just started rebooting it self. If i go to settings, battery and battery health i only see here is unlimited loading. So i just buyed a new battery and test it out and nope. Still the same problems. I cant find any fix to this problem so i asking u guys for a help. Thx a lot.

Crash log: {"bug_type":"210","timestamp":"2022-02-25 20:02:24.00 +0100","os_version":"iPhone OS 15.3.1 (19D52)","incident_id":"5B0E9DF0-476A-4A92-9FAD-8EA1B6D14AF4"} { "build" : "iPhone OS 15.3.1 (19D52)", "product" : "iPhone8,4", "kernel" : "Darwin Kernel Version 21.3.0: Wed Jan 5 21:44:35 PST 2022; root:xnu-8019.80.24~23\/RELEASE_ARM64_S8000", "incident" : "5B0E9DF0-476A-4A92-9FAD-8EA1B6D14AF4", "crashReporterKey" : "e0e8bc9e7c5130faee9bff2ca025e8b9d497217b", "date" : "2022-02-25 20:02:24.82 +0100", "panicString" : "panic(cpu 0 caller 0xfffffff010601ce4): userspace watchdog timeout: no successful checkins from thermalmonitord since wake\nservice returned not alive with context : is_alive_func returned unhealthy : current 1fffffe, mask 1ffffff, expected 1ffffff. EC: 1 EH: 3758097110 3758097110 SD: 0 BC: 0 Missing sensor(s): TG0B \nservice: backboardd, total successful checkins since wake (180 seconds ago): 19, last successful checkin: 0 seconds ago\nservice: SpringBoard, total successful checkins since wake (180 seconds ago): 19, last successful checkin: 0 seconds ago\nservice: mediaserverd, total successful checkins since wake (180 seconds ago): 19, last successful checkin: 0 seconds ago\nservice: logd, total successful checkins since wake (180 seconds ago): 19, last successful checkin: 0 seconds ago\nservice: thermalmonitord, no successful checkins since wake (180 seconds ago)\nservice: runningboardd, total successful checkins since wake (180 seconds ago): 19, last successful checkin: 0 seconds ago\nservice: wifid, total successful checkins since wake (180 seconds ago): 19, last successful che\nDebugger message: panic\nMemory ID: 0x6\nOS release type: User\nOS version: 19D52\nKernel version: Darwin Kernel Version 21.3.0: Wed Jan 5 21:44:35 PST 2022; root:xnu-

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 0
Aggiungi un commento

2 Risposte

Soluzione Prescelta

If you have replaced the battery the next thing to check is the resistor on the battery data line. It commonly gets knocked off or nudged as it is near the battery connector. It will need to be micro soldered back on. That’s why the error report mentions unhealthy and will restart every few minutes.

Block Image

Questa risposta è stata utile?

Punteggio 3

4 Commenti:

Holy smokes. Thx a lot. After school gotta check it.

da

@imicrosoldering hey i got news. The resistor is missing there and i dont know how to get one. If i look under the mikroscope, i see only one transistor on the left. Photo what i means is here: https://ibb.co/x18XfkL

da

@lolxd3097 The only component you need is the one in the square. If it is missing just jumper the two pads as it is only a data line.

da

Is there any risk jumping 2 pads with conductive glue instead of resister?

I accidentally nudged the resisters too. Now i jumps pad with conductive glue and phone is working but i feel it is hotter while using.

da

Aggiungi un commento

For anyone working on the first gen se or the iPhone 5 there is a right way to disconnect the battery connector and a wrong way.

The wrong way is to disconnect it like a usual connector, this leads to components being knocked off the board next to it as mentioned in the comments.

The right way is to use a spudger or a pair of tweezers and slide it between the battery and motherboard and lift the connector up. That way there is no way you can damage or knock off components.

Questa risposta è stata utile?

Punteggio 1
Aggiungi un commento

Aggiungi la tua risposta

lolxd3097 sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 11

Ultimi 30 Giorni: 72

Tutti i Tempi: 4,297